Stained, sagging or wet ceilings and walls dried, opened where needed and repaired, with the source found first.
A brown stain on a ceiling is a message from somewhere else. The water may be from a roof leak, a bathroom above, an air conditioning drain or a pipe in the wall. A sagging ceiling holds water in the drywall and insulation, and it can fall without warning.
We find the source, relieve trapped water safely, remove wet drywall and insulation that cannot dry and dry the cavity. If the damage is limited, we can often repair the ceiling and paint. For larger areas, we coordinate with the repair work so the whole job finishes cleanly.
A bulging ceiling can hold a surprising amount of water. Please keep away from it. We drain it in a controlled way, which is safer than letting it fall.
Insulation holds water against drywall and framing. Wet insulation is usually removed so the cavity can dry. Leaving it behind invites mold.
Stains show through ordinary paint. After the area is dry, we recommend stain-blocking primer so the repair does not show.
The visible stain may be a few feet from the true source. Checking bathrooms above, the roof and nearby plumbing saves a second repair.
Drag the handle to compare.
BeforeAfterRoof, plumbing or HVAC leak found first.
Water relieved from sagging ceilings.
Moisture in insulation and framing measured.
Everything dry before repairs.
Patching, priming and painting.
What to repair and what to replace.
Every topic has its own page with what to expect and how we approach it.
SituationHomeownersWhat homeowners should expect during a restoration project, from first call to final walk-through, and how to stay…Learn more 
SituationStorm SeasonSpring storms, tornadoes, hail and heavy rain are part of life here. A little preparation reduces damage and…Learn more 
SituationLandlords and RentalsRestoring rental homes and apartments quickly, with tenant coordination, documentation and a focus on getting the unit back…Learn more Enter a reference reading from a dry area and a reading from the affected area and see whether the material is close to dry.
Tell us what happened and send photos if you can. We guide you on safety and plan the visit.
We find the source, map the damage with meters and thermal imaging and explain the plan.
Water extraction, board-up, tarping and removal of materials that cannot be saved.
Air movers, dehumidifiers and careful cleaning, with containment for fire and mold work.
Moisture readings and equipment adjustments until the structure is dry.
Repairs, paint and a final walk-through, with records you can keep.
It can be. A bulging or sagging ceiling may hold water and could collapse. Keep people away and call us.
Not until the source is fixed and the area is dry. Painting over damp drywall traps moisture and often brings the stain back.
We check the area above, measure moisture in walls and ceilings and use thermal imaging. A roofer or plumber may confirm the source.
Only if needed. Small damaged sections are often patched and blended.
It can be, if insulation and drywall stay wet. Drying quickly and removing wet materials prevents it.
Burst Pipe CleanupA burst or frozen pipe can release hundreds of gallons in minutes. We stop the spread, remove the…Explore 
Roof Leak and Hail DamageInterior water damage from roof leaks and hail, dried and repaired, with temporary protection in place until the…Explore 
Painting and Finish WorkStain-blocking primer, patching, painting and trim work that make repaired areas disappear into the rest of the room.Explore 
Drywall and Flooring RepairNew drywall, insulation and flooring after water, fire or mold removal, installed and finished to blend with your…Explore Tell us about the job and we will call you back quickly.
Or call (615) 357-7797 to talk now.
